Maytech Dual VESC

  • Sale
  • Regular price €219,00


Important please use the VESC-tool 0.95 or lower! Download here

Dual vesc connected over canbus. The master is the side where the receiver wires arrive. Please set master and slave side correct!

Dual VESC with switch. Based on VESC 4.12. The capacitors are placed between both vesc's wich allows the dual vesc to have a more convenient size that better fits in your enclosure!
 

Compatible with sensor or sensorless motor
Cont. Current: 50Ax2
Burst Current: 240Ax2
BEC: 5V/1.5A
Lipo: 3-12S
PCB Size: 112mm x 60mm
Based on VESC4.12
Only supports VESC_TOOL 0.94 and 0.95 versions

Note: when the vesc is turned off it will still draw about 10mA. So make sure when you don't use your board for a long time to disconnect your battery from the vesc.